Good housing starts with the right environment.
Our 100′ x 50′ Cubicle Building has been designed to provide a bright, airy space for dairy cattle, with Yorkshire boarding and roof lights helping to maximise natural ventilation and daylight throughout the building.
The 4’6″ cantilever provides additional shelter along the front of the building, while concrete panels offer the durability needed in busy livestock areas. Wide access openings make it easy to move cattle, machinery and bedding in and out as required.
It’s a practical building that’s designed around the day-to-day demands of dairy farming.
Ideal for
- Dairy cow housing
- Cubicle accommodation
- Dry cow housing
- Youngstock accommodation
- Feed and bedding storage
Price Information
£33,000 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If your site requires a different layout or specification, we’ll be happy to discuss the options available.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20′) centres with 254 x 146 x 31kg UB stanchions with web stiffeners and 254 x 146 x 31kg UB rafters with rafter stays including CHS rafter bracing to one bay, complete with CHS eaves ties.
Both gable frames have 3 No. 203 x 133 x 25kg UB intermediate sub stanchions, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork will be shot-blasted and painted with a red semi-gloss finish.
Purlins
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Roof Lights
Incorporate 40 No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side.
All gutters are to be PVC with rubber-sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC downpipe clips to stanchions.
Gable Ends
Both gable ends are to have 150 x 22 tanalised timber Yorkshire boarding down to 2.896m (9’6″) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.
Side
One side to have 150 x 22 tanalised timber Yorkshire boarding down to 2.896m (9’6″) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.
Concrete Panels
90mm thick x 1.500m high concrete panels to 24′ on both ends (excluding doorways) and one full side.
Openings
2 No. openings measuring 4.267m (14′) wide x 3.658m (12′) high, with one positioned on each gable end (no doors).
2 No. openings measuring 3.658m (12′) wide x 3.658m (12′) high, with one positioned on each gable end (no doors).
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.