A practical building that has stood the test of time.
Our 80′ x 40′ Dutch Barn is a popular choice for farmers looking for reliable covered storage without the cost of a fully enclosed building. Traditionally used for straw and forage storage, it can also provide cover for machinery, feed, slurry stores and middens.
Designed to maximise usable space while maintaining excellent ventilation, it’s a straightforward solution that works hard year after year.
Ideal for
- Straw and forage storage
- Machinery storage
- Feed storage
- Covering existing slurry stores
- Midden covers
- General farm storage
Price Information
£17,900 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20′) centres with 254 x 146 x 31kg UB stanchions with web stiffeners and 203 x 133 x 25kg UB rafters with rafter stays.
Both gable frames to have 1No. 178 x 102 x 19kg UB intermediate gable hanger, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork to be shotblasted and painted with a red semi oxide finish.
Purlins
To supply 225 x 75 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Roof Lights
Incorporate 16No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 1No. 110mm Ø UPVC downpipe to each side.
All gutters to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC downpipe clips to stanchions.
End Cladding
Both gable ends to be clad down to eaves level with 150 x 22 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
Side Cladding
None.
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.