90' x 45' Silage Pit
Fri, 28th Nov 2025
£44,870 + VAT
LENGTH: 27.432m (90`)
WIDTH: 13.716m (45`)
EAVES HEIGHT: 7.010m (23`)
ROOF PITCH: 15º
The 90′ x 45′ silage pit provides full coverage to reduce waste from the silage face and minimise dirty water runoff.
We’ve designed it with a standard height and width, offering a cost-effective, tried-and-tested solution.
If your machinery requires a different height, please get in touch for a customised quote.
As a guide, this pit can hold upwards of 750 tonnes of good-quality silage.
Got an idea?
Let’s have a chat.
SPECIFICATION
STEELWORK:
To supply for erection on prepared site and concrete foundations, steel portal frame 4.572m (15`) centres with 356 x 171 x 45kg UB stanchions with web stiffeners and 254 x 146 x 31kg UB rafters with rafter stays.
One gable frame to have 2 No. 356 x 171 x 45kg UB intermediate sub stanchions. Other gable frame to have 2 No. 178 x 102 x 19kg UB gable hangers, including CHS rafter and side bracing to both end bays, complete with CHS eaves ties.
All steelwork to be shotblasted and painted with a red semi oxide finish.
PURLINS:
To supply 175 x 75 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
ROOF CLADDING:
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
ROOF LIGHTS:
Not Required.
RAINWATER GOODS:
Eaves gutter to be 160 on the side with 2 No. 110mm Ø UPVC downpipes to each side. All gutters to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC down-pipe clips to stanchions.
END CLADDING:
One gable end to be clad down to eaves level. Other gable end to be clad down to 4.115m (13’6’’) below eaves level, both with 150 x 22 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
SIDE CLADDING:
Both sides to be clad down to 4.115m (13’6’’) below eaves level, with 150 x 22 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
DOORS:
Not Required.
CONCRETE PANELS:
To supply 140mm thick x 3.000m high concrete wall panels to one end and both sides, including panel lifters.