Designed with livestock in mind
Our 60′ x 30′ Livestock Building provides a practical, well-ventilated space that’s ideal for housing animals while offering protection from the weather. The open-fronted design helps maintain airflow, while the 4’6″ cantilever provides additional shelter along the front of the building.
Whether you’re looking for a calf shed, lambing shed or a versatile building for sheep and youngstock, this is a straightforward option that’s built for everyday farm life.
Ideal for
- Calf housing
- Lambing sheds
- Sheep housing
- Youngstock accommodation
- General livestock use
- Feed and bedding storage
Price Information
£15,490 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Included in the Price
The advertised price includes:
- Structural steel frame
- Timber purlins
- Fibre cement roof cladding
- GRP roof lights
- UPVC rainwater goods
- Timber Yorkshire boarding
- Concrete panels
- 4’6″ cantilever
Everything detailed within the technical specification below is included within the advertised supply-only price.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20′) centres with 203 x 133 x 25kg UB stanchions with web stiffeners and 178 x 102 x 19kg UB rafters with rafter stays.
Both gable frames to have 1 No. 178 x 102 x 19kg UB intermediate sub stanchion, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork to be shotblasted and painted with a red semi oxide finish.
Purlins
To supply 225 x 75 graded tanalised timber purlins bolted to frame at 1.525m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Roof Lights
Incorporate 12 No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 1 No. 110mm Ø UPVC downpipe to each side.
All gutters to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC downpipe clips to stanchions.
End Cladding
Both gable ends to be clad down to 2.591m (8’6″) below eaves level with 150 x 22 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
Side Cladding
One side to be clad down to 2.591m (8’6″) below eaves level with 150 x 22 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
Doors
Not included
Concrete Panels
To supply 90mm thick x 2.000m high concrete panels to both gables and one side, including panel lifters.
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.
Important Information
The advertised price is for the supply of the building only. Delivery, erection and groundworks are quoted separately. As this is a pre-designed Special Offer Building, the final specification may vary to suit your location and local wind or snow loading requirements.