Small but surprisingly versatile
Our 30′ x 20′ Multi-Purpose Apex Building is ideal when you need covered space without taking up a huge footprint. The addition of a 4’6″ cantilever provides extra shelter for equipment, feed, materials or machinery, making the most of every square foot.
Whether it’s being used around the farm, in a yard or as general storage, this is a practical building that’s designed to work hard.
Ideal for
- General farm storage
- Small machinery storage
- Feed and bedding storage
- Workshop space
- Yard and estate use
- Protecting equipment from the weath
Price Information
£8,490 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 4.572m (15′) centres with 203 x 133 x 25kg UB stanchions with web stiffeners and 178 x 102 x 19kg UB rafters with rafter stays, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork to be shotblasted and painted with a red semi oxide finish.
Purlins
To supply 175 x 75 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Roof Lights
Incorporate 4 No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 1 No. 110mm Ø UPVC downpipe to one side.
All gutters to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC downpipe clips to stanchions.
End Cladding
Both gable ends to be clad down to 3.810m (12’6″) below eaves level with 150 x 25 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
Side Cladding
One side to be clad down to 3.810m (12’6″) below eaves level with 150 x 25 graded tanalised Yorkshire boarding on 125 x 75 graded tanalised timber sheeting rails.
Concrete Panels
To supply 90mm thick x 1.000m high concrete panels to both gables and one side.
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.