When it comes to farm buildings, sometimes simple is best.
Our 100′ x 60′ Dutch Barn provides a large, open storage area that’s ideal for keeping straw, machinery, feed and equipment protected from the weather while maintaining excellent airflow.
With no side cladding or doors, access couldn’t be easier. Whether you’re loading, unloading or moving machinery in and out, this is a practical building designed around everyday farm life.
Ideal for
- Straw and forage storage
- Machinery and equipment storage
- Feed storage
- General farm storage
- Covering existing slurry stores
- Midden covers
Price Information
£31,700 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20′) centres with 305 x 165 x 40kg UB stanchions with web stiffeners and 254 x 146 x 31kg UB rafters with rafter stays.
Both gable frames to have 2 No. gable hangers, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork will be shot-blasted and painted with a red semi-oxide finish.
Purlins
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges are to be finished with fibre cement barge boards.
Roof Lights
Incorporate 40 No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 2 No. 110mm Ø UPVC downpipes to each side.
All gutters are to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC downpipe clips to stanchions.
End Cladding
Both gable ends are to be clad down to eaves level with 150 x 25 C16 graded tanalised Yorkshire boarding on 125 x 75 C16 graded tanalised timber sheeting rails.
Sides
Not included.
Doors
Not included
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.