Sometimes you just need a shed.
Our 45′ x 30′ General Purpose Building provides covered, secure space that can be used however you need it. Store machinery, keep feed dry, set up a workshop or simply create a bit more room around the yard.
Fully clad and complete with a large sliding door, it’s a straightforward building that does exactly what it’s supposed to do.
Ideal for
- Machinery storage
- Workshops
- Livestock housing
- Feed and bedding storage
- General farm storage
- Small business or yard use
Price Information
£16,900 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 4.572m (15′) centres with 203 x 133 x 25kg UB stanchions with web stiffeners and 178 x 102 x 19kg UB rafters with rafter stays.
One gable frame to have 2 No. 178 x 102 x 19kg UB intermediate sub stanchions. Other gable frame to have 1 No. 178 x 102 x 19kg UB intermediate sub stanchion, including CHS rafter and side bracing to one bay, complete with CHS eaves ties.
All steelwork will be shot-blasted and painted with a red semi-oxide finish.
Purlins
To supply 175 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be closed. Verges are to be finished with fibre cement barge boards.
Roof Lights
Incorporate 6 No. 1.525m corrugated 2.40kg/m² GRP Profile 6 roof lights positioned to suit customer requirements.
Rainwater Goods
Eaves gutter to be 160 on the side with 1 No. 110mm Ø UPVC downpipe to each side.
All gutters are to be UPVC with rubber sealed joints fixed to eaves beams with UPVC brackets at 1m intervals and UPVC downpipe clips to stanchions.
End Cladding
Both gable ends are to be clad down to 4.267m (14′) below eaves level with 0.7mm thick polyester-coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails (excluding door opening).
Side Cladding
Both sides to be clad down to 4.267m (14′) below eaves level with 0.7mm thick polyester-coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails.
Openings
1 No. sliding door measuring 4.267m (14′) wide x 4.267m (14′) high, positioned centrally on one gable end.
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Galvanised steelwork finish
- Concrete panels
Our team will be happy to provide a tailored quotation based on your location and requirements.