When harvest arrives, the last thing you want to worry about is where everything’s going.
Our 1,000T Grain Store provides secure, weather-protected storage with a large access opening and robust concrete panel construction. Built with busy harvest periods in mind, it gives you the space needed to keep grain safely under cover until it’s ready to move.
With capacity for approximately 1,000 tonnes of grain, it’s a practical option for farms looking to increase storage capacity or replace older facilities.
Ideal for
- Grain storage
- Cereal storage
- Feed storage
- General agricultural storage
Price Information
£54,900 + VAT
The advertised price is for the supply of the building only.
This price is based on standard site conditions and loading requirements. Buildings located in areas with higher wind speeds, increased snow loading, coastal exposure or other site-specific requirements may require additional steelwork or design amendments.
Delivery, erection, foundations and groundworks are not included within the advertised price and can be quoted separately if required.
If you’re unsure what applies to your site, our team will be happy to help.
Technical specification
Steelwork
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20′) centres with 406 x 178 x 54kg UB stanchions with web stiffeners and 305 x 165 x 40kg UB rafters with rafter stays.
One gable frame to have 2 No. 356 x 171 x 45kg UB intermediate sub stanchions. Other gable frame to have 3 No. 356 x 171 x 45kg UB intermediate sub stanchions, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.
All steelwork will be shot-blasted and painted with a red semi-oxide finish.
Purlins
To supply galvanised steel purlins by Steel Sections Ltd bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
Roof Cladding
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. The ridge is to be closed. Verges are to be finished with fibre cement barge boards, complete with foam fillers.
Roof Lights
Not included.
Rainwater Goods
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side.
All gutters are to be PVC with rubber-sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC downpipe clips to stanchions.
End Cladding
Both gable ends are to be clad down to 3.200m (10’6″) below eaves level with 0.7mm thick polyester-coated box profile sheets on 150 x 75 C16 graded tanalised timber sheeting rails, complete with foam fillers and shedder flashing.
Side Cladding
Both sides are to be clad down to 3.200m (10’6″) below eaves level with 0.7mm thick polyester-coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails, complete with foam fillers and shedder flashing.
Openings
1 No. opening to be 6.096m (20′) wide x 4.877m (16′) high, positioned centrally on one gable.
1 No. personnel door frame only.
Concrete Panels
140mm thick x 3.000m high concrete panels to both ends and both sides, excluding openings.
Optional Extras
The following items can be added at an additional cost:
- Delivery to site
- Building erection
- Doors
- Galvanised steelwork finish
Our team will be happy to provide a tailored quotation based on your location and requirements.