Sheep Shed

Agricultural Kit Building including steelwork, purlins, roof cladding, roof lights, rainwater goods, end cladding and side cladding.

Please note that steel sizes/building specifications may vary depending on the location of your building & its local weather conditions.

STEELWORK
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20`) centres with 305 x 165 x 40kg UB stanchions with web stiffeners and 254 x 146 x 31kg UB rafters with rafter stays.

Both gable frames have 4 No. 203 x 133 x 25kg UB intermediate sub stanchions, including CHS rafter and side bracing to one end bay, complete with CHS eaves ties.

All steelwork will be shot-blasted and painted with a red semi-oxide finish. 

PURLINS
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.

ROOF CLADDING
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.

ROOF LIGHTS:
Incorporate 40 No. 1.525m corrugated 2.40kg/m² GRP profile 6 roof lights in roof cladding positioned to suit the customer’s requirements.

RAINWATER GOODS
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side. All gutters are to be PVC with rubber-sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC down-pipe clips to stanchions.

END CLADDING
Both gable ends are to have 150 x 22 tanalised timber Yorkshire boarding down to 2.134m (7`) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.

SIDE CLADDING
Both sides are to have 150 x 22 tanalised timber Yorkshire boarding down to 2.134m (7`) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.

OPTIONAL EXTRAS

These items incur extra charges – our estimating team will be able to provide you with current pricing.

• Doors:
  • 2 No. Sliding Doors to be 3.048m (10`) wide x 3.658m (12`) high in 2 halves, positioned centrally on each end. Constructed out of 70mm x 70mm RSA and clad with PVC or polyester coated box profile steel sheets and to be teck screwed to the main frame.  Doors are to be hung on galvanised sliding door tracks with bottom door guides.  Bottom door guides are to be installed in concrete by others.  Colours available: Van Dyke Brown, Slate Blue, Juniper Green, Goosewing Grey.
• Concrete Panels