Agricultural Kit Building including steelwork, purlins, roof cladding, roof lights, rainwater goods, end cladding & side cladding.
Please note that steel sizes/building specifications may vary depending on the location of your building & its local weather conditions.
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20`) centres with 356 x 171 x 45kg UB stanchions with web stiffeners and 305 x 165 x 40kg UB rafters with rafter stays.
One gable frame to have 2 No. 305 x 165 x 40kg UB intermediate sub stanchions. Other gable frames to have 1 No. 305 x 165 x 40kg UB intermediate sub stanchion, including CHS rafter and side bracing to both end bays, complete with CHS eaves ties.
All steelwork will be shot-blasted and painted with a red oxide finish.
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. The ridge is to be closed. Verges are to be finished with fibre cement barge boards. Complete with foam fillers.
Incorporate 12 No. 1.525m corrugated 2.40kg/m² profile 6 roof lights in roof cladding positioned to suit the customer’s requirements.
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side. All gutters are to be PVC with rubber-sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC down-pipe clips to stanchions.
Both gable ends are to be clad down to 2.591m (8`6”) below eaves level with polyester-coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails, complete with foam fillers and shedder flashing.
Both sides are to be clad down to 2.591m (8`6”) below eaves level with polyester-coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rail, complete with foam fillers and shedder flashing.
These items incur extra charges – your estimator will be able to provide you with pricing.
- Concrete Panels: 140mm thick x 3.000m high to both ends and both sides, excluding doorways.
- 1 No. Roller Shutter Door to be 4.572m (15`) wide x 4.572m (15`) high, manual operation, plain galvanised finish, positioned on one end.
- 1 No. Personnel Door to be 880mm wide x 2075mm high with 10-point locking, positioned on one side.
Back to all Buildings